아미코젠은(AMICOGEN)은 AMICO(=라틴어로 "친구")+GEN(=Gene,
"유전자")의 합성어로 아미코젠의 핵심 원천기술인 유전자진화기술을
바탕으로 인류의 지속가능한 발전과 지구환경을 보호하는 "진정한 친구"로
함께 성장하고자 하는 의지를 담고 있습니다.
아미코젠 바이오텍R&D센터는 바이오플랫폼 기술을 토대로 R&D 영역을
확대하고 있으며, 연구 인력은 전체 임직원의 30%를 차지하고 있습니다.
남보다 한발 앞선, 그리고 인류와 사회의 발전을 주도할 수 있는 신기술 개발로
바이오 산업을 선도해 나갈 것입니다.
아미코젠은 독자적인 유전자 진화기술(i DNA evolution™)을 바탕으로
산업용·제약용 특수효소를 개발하였습니다. 특수효소를 활용하여 건강기능
식품 원료인 바이오신소재, 단백질정제레진을 개발하여 인류의 지속적인
성장과 평생의 건강에 기여하고자 합니다.
아미코젠은 바이오벤처 회사로 시작하였기에, R&D에 핵심 역량을 집중하고
혁신적인 기술과 제품으로 지속가능한 성장을 추구하고 있습니다. 기업가치와
주주가치를 높이기 위해 특수효소사업·헬스케어사업·단백질정제레진
사업 등 핵심역량을 지속적으로 강화하고 있습니다.
아미코젠은 인류건강과 환경보호에 공헌이라는 가치실현을 위해 다양한
활동을 추진하고 있습니다. 새로운 가치를 창출하기 위한 성장과 도약을 통해
아미코젠은 글로벌 바이오회사로 자리매김하고 있습니다.
아미코젠은 지난 20여년 간 항상 지속가능성의 관점에서 인류와 환경을 생각한 바이오 혁신기술을 개발하고 사업을 영위해 왔습니다. 아미코젠의 환경적 건전성, 사회적 책임성, 그리고 지속가능 혁신 기술성을 바탕으로 지속가능한 발전을 계속해 나가겠습니다.
아미코젠은 사람 중심의 경영을 통해 창조적인 생각과 끊임없는 혁신을
바탕으로 새로운 기술과 가치를 창출하고 있습니다. 고유한 역량과 잠재력을
가진 우수한 인재들이 직무 특성에 맞춰 역량을 발휘할 수 있도록
최선을 다하고 있습니다.
아미코젠은 차별화된 R&D 기술과 품질관리 능력으로
새로운 바이오 제품과 건강기능식품 원료를 개발하고 있습니다.
OptioBio™ 40S 10x100
Prepacked OptioBio™ 40S 10x100 glass columns are designed for small-scale purification
as well as screening and optimization in bioprocess development and scale-up.
• Prepacked for reliable and reproducible results
• Optimal for high-performance small-scale purification and method optimization in bioprocess development
• High throughput and purity
Product
OptioBio 40S 10x100 column is prepacked with WorkBeads™ 40S resin for ion exchange chromatography (IEX).
The resin is designed for research and industrial scale purification of proteins,
peptides and nucleic acids and utilise the difference in their surface charge.
WorkBeads 40S is a strong cation exchange resin with sulfonate ligands.
WorkBeads are agarose based chromatographic resins manufactured using a proprietary method
that results in porous beads with a tight size distribution and high mechanical stability.
WorkBeads resins are designed for separations that require optimal capacity and purity.
Main characteristics of OptioBio 40S 10x100 and OptioBio 40Q 10x100 columns
| OptioBio 40S 10x100 | OptioBio 40Q 10x100 |
Target substance | Proteins and peptides | Protein, peptides and oligonucleotides |
Resin | WorkBeads 40S |
|
Matrix | Rigid, highly cross-linked agarose | Rigid, highly cross-linked agarose |
Average particle size (DV50)1 | 45 μm | 45 μm |
Ionic group (ligand) | Sulfonate (-SO3- ) | Quarternary amine (-N+(CH3)3) |
Ionic capacity | 0.18 - 0.25 mmol Na+/ml resin | 0.18 - 0.25 mmol Cl-/ml resin |
Dynamic binding capacity (DBC) | 150 mg BSA/ml resin2 | 47 mg BSA/ml resin3 |
Column volume (CV) | 7.9 ml | 7.9 ml |
Column dimension | 10 x 100 mm | 6 ml/min (450 cm/h) |
Recommended flow rate | 2 - 4 ml/min (150 - 300 cm/h) | 2 - 4 ml/min (150 - 300 cm/h) |
Maximum flow rate4 | 6 ml/min (450 cm/h) | 6 ml/min (450 cm/h) |
Column hardware pressure limit | 2.1 MPa, 21 bar, 305 psi | 2.1 MPa, 21 bar, 305 psi |
Chemical stability | Compatible with all standard buffers used for protein purification, 1 M NaOH, 30 % isopropanol or 70 % ethanol. Should not be stored at < pH 3 for prolonged time. | |
pH stability | 3 - 12 (working range) | 3 - 12 (working range) |
Storage | 2 to 25 °C in 20% ethanol | 2 to 25 °C in 20% ethanol |
1. The median particle size of the cumulative volume distribution.
2. Dynamic binding capacity determined in 20 mM Na-citrate, pH 4.0, at a flow of 2 ml/min (150 cm/h; 4 minutes residence time).
3. Dynamic binding capacity determined in 50 mM Tris-HCl, 50 mM NaCl, pH 8.0, at a flow of 2 ml/min (150 cm/h; 4 minutes residence time).
4. Maximum flow rate for aqueous buffers at 20 °C. Decrease the maximum flow rate if the liquid has a higher viscosity. Higher viscosities can be caused by low temperature. Use half of the maximum flow rate for 20% ethanol.
Product List
Product name | Size/Volume | Article Number |
OptioBio 40Q 10x100 | 7.9ml, Single | 55 410 011 |
OptioBio 40S 10x100 | 7.9ml, Single | 55 420 011 |